Cannabis Grinding Equipment

TRADELABOR has more than 20 years of experience in the control and treatment of air, working with an experienced and qualified technical staff and with the most advanced technology in this area, which together guarantee the quality of the services provided.




Working principle cutting
Optimal for material type hard, tough-elastic, temperature-sensitive
Cutting tools rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives
Materials of the cutting tools hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01
Max. feed size (depending on the material and funnel) 70 x 80 mm
Max. throughput (depending on the material and sieve size) 60 l/h
Final fineness (depends on sieve cassette also available in further perforations) 0.2 – 10 mm
Feeding batchwise/continuous
Variable rotor speed 50-700 rpm
Rotor peripheral speed 0.26-3.66 m/s
Drive Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque
Electrical Details 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve cassette used) LpAd = 75 dB
Weight 79 kg
Dimensions (W x D x H) table mounted or on support frame 44 x 79 x 56 cm

The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 50-700 rpm is also available in the following voltages and versions:

Order no. Electrical details / Torque
(three-phase motor with frequency converter and flywheel mass for stabilising the drive torque)
19.3040.00 for 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm
19.3000.00 for 200-240 V/1~, 50-60 Hz, 2350 watt, 26 Nm
19.3010.00 for 100-120 V/1~, 50-60 Hz, 1725 watt, 24 Nm

The PULVERISETTE 19 with voltage of “/3~”can only be operated on a three-phase supply network.
Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power.

The single-phase versions of the new Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter.


Continue at:


The text above is owned by the site above referred.

Here is only a small part of the article, for more please follow the link

Also see:


Manostaxx – Industrial Management Consulting

Leave a Reply

Your email address will not be published. Required fields are marked *